PAGULD Automatic Lubrication .

Autogreasers Increase Returns On Your Equipment Investment

Allguard Greasing Systems are designed for the extreme weather conditions and severe job requirements often faced in indonesia, using components from Paguld Lubrication. Completely reliable and fully automatic, a Paguld System will increase your component life and overall productivity.

The Autogreaser dispenses small measured amounts of grease at frequent intervals while your equipment is operating, maintaining a consistent grease seal to prevent dirt and contaminants from migrating into your bearings. It will help keep your loaders, pavers, excavators, graders, mining and other heavy equipment out on the job and reduce your labor costs when compared to the traditional method of point-by-point manual greasing.

Typical Automatic Greasing System Layout

The progressive lubrication system is composed of the supply unit, the progressive distribution unit, pipeline accessories, and the control unit. Under the pressure from the supply unit, the progressive distribution unit delivers a fixed amount of lubricant to each lubrication point in a progressive order. The progressive lubrication system monitors the operation status of the whole system through the control unit. The system adopts a timing control mode or a counting control mode; in the timing mode, the lubrication time or the interval time is adjustable; in the counting mode, the lubrication frequency or the interval time can be adjusted. It is mainly used by small and medium-sized equipment that requires centralized and continuous lubrication.

PAGULD - Lubrication System for Progressive.

PG203 Electric Lubrication Pump

The PG203 electric lubrication pump is an automatic centralized lubrication pump with excellent performance that supports up to three pump elements. It is suitable for progressive centralized lubrication systems and is commonly used in construction machinery, bus chassis and small and medium-sized mechanical equipment.Its compact structure and integrated pump base make it highly economical and universal. Besides, its optional low-level alarm, blockage alarm and control unit significantly expand its applications in multiple industries.

Technical Parameters

 

  • System pressure : 35MPa
  • Volume of reservoir : 4L、8L
  • Operating voltage : 12VDC,24VDC、230VAC
  • Pump element mL/minute : K6 (2,8 ml/minute), K7 (4 ml/minute),
  • Number of pump element : 1- 3 Pump Elements
  • Operating temperatures : -40 – 80℃

PG231E Electric Lubrication Pump

The PG231E electric lubrication pump is an automatic centralized lubrication pump with excellent performance that can support up to four pump elements. It is suitable for progressive centralized lubrication systems and is commonly used in construction machinery, bus chassis, and small and medium-sized mechanical equipment.

It is universal, compact, and highly functional. Its pump base, which is made of high-strength lightweight metal, further improves its anti-seismic performance. Besides, its optional low-level alarm, blockage alarm and control unit significantly expand its applications in multiple industries.

Features

  • System pressure : 35MPa
  • Volume of reservoir : 2L/4L/8L
  • Operating voltage : 12VDC,24VDC、230VAC
  • Pump element mL/minute : K6 (2,8 ml/minute), K7 (4 ml/minute),
  • Number of pump element : 1- 4 Pump Elements
  • Operating temperatures : -40 – 80℃

PAGULD - Lubrication System for Single-line.

HCH Hydraulic Lubrication Pump

The HCH the hydraulic lubrication pump is a double-acting piston pump that is operated by hydraulic pressure. It uses a single-line parallel metering component to deliver greases at both the up and down strokes. It operates in conjunction with the cyclic timing control system and is often applied by single-line centralized lubrication systems. When lubricant should be delivered to lubrication points, the solenoid valve located at the front of the hydraulic motor is energized, and the pump begins to work. After the injector completes its work and the required system oil pressure is built up, the pressure switch transmits the signal to the control unit, which cuts off the power supply of the solenoid valve, and the whole system relieves pressure and enters the next lubrication cycle.

Features

  • Product specification : 18Kg、27Kg、41Kg、54Kg、180Kg
  • Maximum working pressure : 30MPa
  • Solenoid valve operating voltage : 24VDC
  • Pressure ratio : 15:1
  • Grease outlet thread : 1/4NPTF , 3/4NPTF 
  • Hydraulic grease working pressure :  20bar-205bar
  • Hydraulic grease rate of flow : 0.25-3.0L/minute
  • Hydraulic grease operating temperature : Maximum 93℃
  • Pump operating temperature : -40℃ – +65℃
  • Applicable grease type : Up to NLGI 2#

AOGP Pneumatic Pump

The AOGP series is a pneumatic operated double acting piston pump that uses a single-line parallel grease metering component to distribute grease during both the upper and lower strokes. It is used in conjunction with control systems and is commonly used in single-line centralized lubrication systems.

When lubricant needs to be added to the lubrication points, the solenoid valve at the front end of the pneumatic lubrication pump is powered on, and the lubrication pump starts working. When the injectors complete the grease filling operation and the pressure in the main pipeline of the system rises to the set pressure, the pressure switch sends a feedback signal to the control system, which cuts off the power supply to the solenoid valve at the front end of the pneumatic lubrication pump. The system releases pressure and enters the next lubrication cycle.

Features

  • Product specification : 18Kg、27Kg、41Kg、54Kg、180Kg
  • Maximum working pressure : 30MPa
  • Compressed air pressure :  3-10bar
  • Solenoid valve operating voltage : 24VDC
  • Pressure ratio : 50:1
  • Displacement of each cycle : 5.7cc
  • Maximum displacement per minute :  0.43L/minute @75cycle
  • Grease outlet thread : 1/4NPTF , 3/4NPTF
  • Pump Operating temperature : -34℃ ~ +93℃
  • Applicable grease type : Up to NLGI 2#